Posts by Mondaine

Category: RSS

Mondaine Lilli Watch for women

Visit this page to find your own Mondaine watch.

Mondaine Lilli Watch | A666.30339.11SBM

Feminine, elegant and easy to read. With a 20mm polished stainless steel square case, the Mondaine Lilli is so feminine and elegant. Lilli is available with either a black or red thin leather strap, or an open-linked steel bracelet for ultimate appeal. The white dial reflects Mondaine’s Official Swiss Railways Watch easy-to-read iconic look.

Model number A666.30339.11SBM
Family/Series Line Extension
Function Time
Movement (manufacturer, ref) RONDA 753
Movement (type) Quartz
Case size/diameter (mm) 20.00
Case material Stainless Steel polished
Case back Pressed Caseback
Crown Regular Gasket
Crystal/Glass material Hardened Mineral
Water resistance (m/ft/atm) 30 / 100 / 3
Strap/Bracelet material Metal
Strap/Bracelet finishing Polished
Strap width at lug (mm) 6.00
Battery reference 379
Battery lifespan 28 months
Origin Swiss Made

Mondaine Lilli Watch Red Strap

Visit this page to find more choices of Mondaine watch straps.

Mondaine Ladies Lilli Watch Red Strap

Feminine, elegant and easy to read. With a 20mm polished stainless steel square case, the Mondaine Lilli is so feminine and elegant. Lilli is available with either a black or red thin leather strap, or an open-linked steel bracelet for ultimate appeal. The white dial reflects Mondaine’s Official Swiss Railways Watch easy-to-read iconic look.

Model number A666.30339.11SBC
Family/Series Line Extension
Function Time
Movement (manufacturer, ref) RONDA 753
Movement (type) Quartz
Case size/diameter (mm) 20.00
Case material Stainless Steel polished
Case back Pressed Caseback
Crown Regular Gasket
Crystal/Glass material Hardened Mineral
Water resistance (m/ft/atm) 30 / 100 / 3
Strap/Bracelet material Genuine Leather
Strap/Bracelet finishing Polished
Strap width at lug (mm) 6.00
Battery reference 379
Battery lifespan 28 months
Origin Swiss Made

How to fit a watch strapto Mondaine watch? -Part 2

PDF Download + Training Video 2

                               (Download the PDF File)

In this video I will take you through that exact instructions.

You will learn:

• About the two spring bars  and what they’re used for

• I will show you the  exact tools you need to change your strap

• Follow the exact step-by-step instructions how to insert the sping bars on your strap

Once you have watched the above video, be sure to checkout Part 3 below

Spring bar removal tool – Part 3

How to use a spring bar removal tool to change replacement watch strap?

PS: Enjoy and share.

Choosing the correct Mondaine watch Strap – Part 1

PDF Download + Training Video 1

                               (Download the PDF File)

In this three part video training I will walk you through that exact process.

You will learn:

• How to Get the  right size for your watch strap 

• Understanding the type of replacement straps available for  your Mondaine

• I’ll show you the 4 types of straps and how to locate the IDs (numbers) for each strap

Once you have watched the above video, be sure to checkout Part 2 below

Enjoy and share :)

Tanya.

 

dscf0016edit1024bk7

The hands on my Mondaine clock are bent.

This is an occasional problem usually associated with moving home and the clock getting knocked.

Mondaine produce a high quality product at quite a reasonable price, but the engineering and design challenge in replicating the look of the actual station clock has presented some problems for Mondaine.  The second hand has, as you know, a large spot on the end which replicates the signal used by guards or conductors on the trains to let the driver know that it is safe and ready to move off.  Excellent so far!  However, this spot puts a strain on the pivot at the motor and makes the second hand unbalanced.  To rectify this, Mondaine has put a counter-balancing weight on the opposite end.  This is a very fine balance which can be upset if the clock receives a knock.  Your first port of call is the Mondaine Service Centre which will rectify the issue (see where can I get my watch serviced above).  Alternatively, use a local clock maker who could do the job for you.  If you wish to carry this out yourself, it can be done.

The remedy is easy, but needs careful attention.  You will need:

  • a soft cloth on which to rest the clock face down
  • a small to medium cross-head screwdriver
  • a very small cross-head screwdriver
  • a very sharp bladed knife or Stanley blade
  • a small pair of square end pliers
  1. Place the clock face down on the cloth
  2. Remove the battery (ies)
  3. Remove the four large screws and take off the back of the clock
  4. (Large clock only) Remove the power input at 6.00 position.  Gently use the pliers to to unscrew the outer ring and push the socket clear of the clock.
  5. At each stanchion around the clock on which the back sits, there is a screw.  Additionally there are screws between the stanchions.  Remove these also.
  6. Withdraw the whole back of the clock from the frame.
  7. (Small clock) there is a “sellotape” seal joining the clock and the glass.  Slide the sharp knife around the join to split the glass and the clock.
  8. (Large clock)  As above, but there is a synthetic rubber seal around the glass which needs to remain on the rim.  If it comes off, it is difficult to put back, but it is not the end of the world if you cannot get it back on; the clock can still function.
  9. Carefully turn the clock over.  If the second hand has become bent or unbalanced gently press the centre to ensure that it is fully home.  If it is bent, try to spot at which point it becomes distorted and use this point as a fulcrum with your finger and bend the second hand up or down depending on what has happened.  DO NOT bend the whole second hand as this will put a strain on the pivot mechanism and you risk distorting it and making matters worse.
  10. Replace the glass in the frame and replace the back carefully aligning the screw holes holes.
  11. Reverse the above steps.
pdf1

Replacement handbooks or manuals

Did you know you can obtain replacement handbooks and manuals?  

Try this link to download a pdf (instruction manuals) for all models of Mondaine Official Swiss Railways Watches.

Please note, that download link will take you to Mondaine official website.

Mondaine1

Will I get this reaction to Mondaine watches?

I am sensitive to some base metals and especially have an allergic reaction to Nickel.  Will I get this reaction to Mondaine watches?

Mondaine, as a thoroughly responsible company, subjects all of its range to stringent tess to ensure they comply with EC and International standards.



To quote them:

The materials used by Mondaine are subjected to severe tests in order to avoid allergies. For those who are hyper-sensitive to stainless steel we recommend you buy a watch which is made from titanium, gold or plastic.

Can’t say fairer than that!  Most good retailers will I am sure be prepared to let you test drive the model you are interested in to see if there is a reaction.  Obviously, you would need to return the watch in perfect condition if you prove to be a reactor.

Watch repair

Where can I get my Mondaine serviced?

Mondaine watches are hard wearing and made to a high standard, but even so, occasionally the watch will need a service to maintain it.  The Mondaine service centre offers a range of services to keep you on time.

They offer a partial maintenance from a bracelet sizing service around £15 or so, or more complicated work including:

  • Rating/regulating check
  • replace crown, gaskets and a new battery where needed
  • water resistance control
  • Case and bracelet cleaning
  • Final bench testing

Costs vary according to the sophistication of the watch but expect to pay £20-£35 or so.

There is also a complete maintenance service:

  • Movement dissembling, cleaning, reassembling, oiling, regulating and functions checked
  • Replace crown, gaskets and battery where necessary.
  • Repair or replacement of worn movement parts
  • Water resistance control and case and bracelet cleaning and bench testing.

Expect to pay £50-£80 or so, and of course parts are extra.

Another optional service restores your watch to near perfect condition, with cleaning, polishing and scratch removal.  This is not a guaranteed restoration as obviously it depends on the depth of scratches etc.  But talk to them and get advice.

The address is:
Mondaine Service Centre,
Locker Hull and Thornton Ltd
10 High View Close
Vantage Business Park
Hamilton
LE4 9LJ

01664-420003 or mondaine@lockerhullthornton.com
Go to site.

A word of sensible advice – do use a “signed for” delivery service (Royal mail is perfect) and attach a tag with your details on it.  Do feel free to ask for an estimate. Allow a couple of weeks for diagnosis and estimate, and another couple or so from go ahead for the work to be completed.

How to reset a chronograph

My Chronograph doesn’t go to zero

Sometimes when you zero your Chronograph after using the stop watch and pause function, the second hand does not go back to zero.  You need to reset it and this is how you do it!

Instructions for re-setting.
On the right are 3 buttons lettered from the top A, B and C, and you will need to adjust the second hand (S), the 10th second elapsed hand (10th), and the minute elapsed hand (M).

1. Pull crown button B out to position 2. Press buttons A and C simultaneously for at least 2 seconds. This enters the adjustment mode.

2.  Adjusting second hand (S). Press A and the hand will move once; press sufficiently to allow chrono second hand to work towards 12 at the top. Confirm the adjustment by pressing button C.
3.  Adjusting 10th second hand (10th). Press A as above and it will move once, continue until the hand goes to 10 or 0 at the tiop. Confirm the adjustment by pressing button C
4.  Adjusting chrono minute hand (M). Press button A until the hand is set to 30. Confirm the adjustment by pressing button C
5.  Press B crown button back in and this is now reset.
Tip – for fast forwarding button A, press and hold for at least 1 second.
mesh-strap

How do I adjust a mesh strap?

Adjusting a Mondaine mesh steel strap is easy but there are a couple of pitfalls of which you should be aware.

In the next few steps I will explain how easy is to adjust your watch, if you have chosen a mesh strap particularly. Mesh straps are very popular lately they all go very well with our collection of Mondaine watches and some of our clients prefer mesh and not leather.

See steps below:

Step 1.  On the reverse of the strap you should see a succession of ridges.  You will also notice a corresponding ridge on the clasp.  Sounds obvious, but once you have decided where the clasp should reside on the strap, you need to align these two ridges.

The reverse of the strap

Step 2. Get a piece of string or ribbon and wrap it around your wrist.  Snip the string so that one end meets the other and measure this diameter.

Step 3.  On the other end of the strap you will see the hook which goes over the clasp – you will see the next picture.  From this hook the measured distance will be where the end of the string lies.

The clasp mechanism - the watch is to the right of the picture

Step 4.  This is the tricky bit!  Insert a small screwdriver into the hole on the main clasp part, from the right hand side and bend it down towards the strap thus opening the clasp.  Do not  insert a tool from the left side, under the clasp and use the bar as a fulcrum; you will bend this rod and the watch strap will not hook over it.  Move the clasp to the desired position and gently locate the ridge nearest the position.  Once located, press down on the open clasp until it clicks into place – voila!

PRMondainesport

Mondaine Sport I

Introducing Mondaine Sport I

New for the second half of 2010, Mondaine is pleased to introduce the timeless and iconic Mondaine Sport I, featuring two new dial variations. This timepiece uses the Swiss Railway Clock design, famous the world over, and now the Sport I comes with two fantastic new dials, available in either black or white.

The first is a very modern dial using the famous SBB logo , repeated throughout the dial. (SBB is the abridged name of Schweizerische BundesBahnen = Swiss Federal Railways). An evocative and contemporary logo, it makes for the perfect dial treatment for the Sport I classic.
A more traditional sunray pattern, with rays of graduating thicknesses emanating from the center of the watch dial, marks the second version. Subtle, yet distinctive, these new dials give the Sport I a fresh new look.

The Sport I comes in a stainless steel, matte brushed finish 41 mm case, with the date at three o’clock. The watch comes on a black leather strap with black stitching. The watches are accompanied by a two-year warranty and backed by the Mondaine International Service Network (MISO), available from September 2010.

Mondaine or sometimes called swiss railway watch, represents affordable luxury. The Mondaine timepiece design is distinct, clean, easy to read and immediately identifiable thanks to its signature red seconds hand – all superb selling points for retailers and high-demand features for consumers. The timepieces are crafted of high quality materials and are Swiss made.
Mondaine Watch Ltd. is the creator of the Official Swiss Railways Watch collection, licensed by “Swiss Railways SBB” and launched over 20 years ago. Inspired by the Swiss Railways clocks, which have indicated the precise time at all Swiss train stations for more than 60 years, these Mondaine watches put this iconic clock on the wrist.